Your partner for sports equipment

1.1.3.1-Tunel-Dos-Alturas-2-1080x608
1.1.3.1-Tunel-Dos-Alturas-1-1080x608

Two-height/inclined tunnel

This model is designed to overcome different heights, such as stairs or an access ramp.

Extruded profiling for the arcs enables the canvas panels to be replaced by the client themselves.

Custom manufacturing is available.

Technical characteristics

  • Standard height: 2.30 metres
  • Length up to 16.52 m in a single profile. It is possible to connect as many tunnels as required by means of arc-to-arc junction plates.
  • Standard distance between arcs: 1.18 meters
  • Standard widths: 1.50, 2.00, 2.50, 3.00 3.50 and 4.00 metres.

Parts

  • Tip: Extruded aluminium part that serves as the pivot for the scissors
  • Blade: An 50x13.5mm aluminium profile. The blade is formed by tip + profile + tip.
  • Scissors: The scissors consist of a set of two blades
  • Tensors : Lacquered iron parts which tighten the canvas (unique in the market). A pair of tensors are fitted every 2 sections
  • Strips: Nylon parts inserted into the profile by which the scissors are moved when opening or closing the tunnel.
  • Brackets: Metal supports used to anchor the tunnel to the wall.
  • Wheels: There are 3 different wheel types available, depending on use and location:
  • Nylon wheels: The most widely used, default option. They provide optimum sliding on parquet, linoleum, and other smooth surfaces.
  • Rubber wheels: For similar uses to the nylon wheels but with improved grip due to their rubber finish.
  • Pneumatic wheels: For outdoor use on grass, gravel or dirt.
  • Handles: Aluminium handles on the exit end of the tunnel
  • Buckle straps: Nylon straps with hook and loop buckle at both ends of the tunnel to close when folded.
  • Slope plate: Lacquered metal plate for option of tunnel at two heights / unevenness.

Options

  • Windows
  • Doors
  • Lacquering
  • Lettering
  • Transparent

Accessories

  • Handle: Parts to fix the scissors in the desired position when this is not possible by means of the tensioners themselves.
  • Anti-lifting guide: Aluminium guide along which the tunnel slides and prevents its movement
  • Wheel with brake: Wheel with brake + special coupling parts.
  • “Wind rings”: For use in moderate wind conditions. The canvases incorporate "winds rings".
  • Standard tunnel manual
  • Standard tunnel assembly guide
  • M2 PVC canvas catalogue
Request an estimate
1.1.3.2-Tunel-Distinto-Emboque-1-1080x608
1.1.3.2-Tunel-Distinto-Emboque-2-1080x608

Tunnel with different openings

If a different height for one end of the tunnel is required, we can widen or reduce the opening appropriately. It is possible to link openings of more than one tunnel.

Extruded profiling for the arcs enables the canvas panels to be replaced by the client themselves.

Custom manufacturing is available.

Technical characteristics

  • Length of up to 16.52 metres in a single piece. It is possible to connect as many tunnels as required by means of arc – to – arc connectors. (junction plates)
  • Standard distance between arches: 1.18 metres.

Parts

  • Tip: Extruded aluminium part that serves as the pivot for the scissors.
  • Blade: An 50x13.5mm aluminium profile. The blade is formed by tip + profile + tip.
  • Scissors: The scissors consist of a set of two blades.
  • Tensors: Lacquered iron parts which tighten the canvas (unique in the market). A pair of tensors are fitted every 2 sections
  • Strips: Nylon parts inserted into the profile by which the scissors are moved when opening or closing the tunnel.
  • Brackets: Metal supports used to anchor the tunnel to the wall.
  • Wheels: There are 3 different wheel types available, depending on use and location:
  • Nylon wheels: The most widely used, default option. They provide optimum sliding on parquet, linoleum, and other smooth surfaces.
  • Rubber wheels: For similar uses to the nylon wheels but with improved grip due to their rubber finish.
  • Pneumatic wheels: For outdoor use on grass, gravel or dirt.
  • Handles: Aluminium handles on the exit end of the tunnel
  • Buckle straps: Nylon straps with hook and loop buckle at both ends of the tunnel to close when folded.

Options

  • Windows
  • Doors
  • Lacquering
  • Lettering
  • Transparent

Accesorios

  • Handle: Parts to fix the scissors in the desired position when this is not possible by means of the tensioners themselves.
  • Anti-lifting guide: Aluminium guide along which the tunnel slides and prevents its movement.
  • Wheel with brake: Wheel with brake + special coupling parts.
  • “Wind rings”: For use in moderate wind conditions. The canvases incorporate "winds rings".
  • Standard tunnel manual
  • Standard tunnel assembly guide
  • M2 PVC canvas catalogue
Request an estimate
1.1.3.3-Tunel-Con-Curva-2-1080x608
1.1.3.3-Tunel-Con-Curva-1-1080x608

Curved tunnel

This tunnel is used in cases where the beginning and the end of the tunnel are not aligned, and bends are incorporated to provide the solution. Extruded profiling for the arcs enables the canvas panels to be replaced by the client themselves.

Custom manufacturing is available.

Technical characteristics

  • Standard height: 2.30 metres.
  • Length up to 16.52 m in a single profile. It is possible to connect as many tunnels as required by means of arc-to-arc junction plates.
  • Standard distance between arcs: 1.18 meters.
  • Standard widths: 1.50, 2.00, 2.50, 3.00 3.50 and 4.00 metres.

Parts

  • Tip: Extruded aluminium part that serves as the pivot for the scissors.
  • Blade: An 50x13.5mm aluminium profile. The blade is formed by tip + profile + tip.
  • Scissors: The scissors consist of a set of two blades.
  • Tensors: Lacquered iron parts which tighten the canvas (unique in the market). A pair of tensors are fitted every 2 sections
  • Strips: Nylon parts inserted into the profile by which the scissors are moved when opening or closing the tunnel.
  • Brackets: Metal supports used to anchor the tunnel to the wall.
  • Wheels: There are 3 different wheel types available, depending on use and location:
  • Nylon wheels: The most widely used, default option. They provide optimum sliding on parquet, linoleum, and other smooth surfaces.
  • Rubber wheels: For similar uses to the nylon wheels but with improved grip due to their rubber finish.
  • Pneumatic wheels: For outdoor use on grass, gravel or dirt.
  • Handles: Aluminium handles on the exit end of the tunnel
  • Buckle straps: Nylon straps with hook and loop buckle at both ends of the tunnel to close when folded.

Options

  • Windows
  • Doors
  • Lacquering
  • Lettering
  • Transparent

Accessories

  • Handle: Parts to fix the scissors in the desired position when this is not possible by means of the tensioners themselves.
  • Anti-lifting guide: Aluminium guide along which the tunnel slides and prevents its movement.
  • Wheel with brake: Wheel with brake + special coupling parts.
  • “Wind rings”: For use in moderate wind conditions. The canvases incorporate "winds rings".
  • Standard tunnel manual
  • Standard tunnel assembly guide
  • M2 PVC canvas catalogue
Request an estimate
1.1.3.4-Tunel-Capota-1-1080x608
1.1.3.4-Tunel-Capota-2-1080x608

Canopy tunnel

The canopy folding option is used when the front of the tunnel is required to fold towards the ground. Extruded profiling for the arcs enables the canvas panels to be replaced by the client themselves.

Custom manufacturing is available.

Technical characteristics

  • Standard height: 2.30 metres.
  • Length up to 16.52 m in a single profile. It is possible to connect as many tunnels as required by means of arc-to-arc junction plates.
  • Standard distance between arcs: 1.18 meters.
  • Standard widths: 1.50, 2.00, 2.50, 3.00 3.50 and 4.00 metres.

Parts

  • Tip: Extruded aluminium part that serves as the pivot for the scissors.
  • Blade: An 50x13.5mm aluminium profile. The blade is formed by tip + profile + tip.
  • Scissors: The scissors consist of a set of two blades.
  • Tensors: Lacquered iron parts which tighten the canvas (unique in the market). A pair of tensors are fitted every 2 sections
  • Strips: Nylon parts inserted into the profile by which the scissors are moved when opening or closing the tunnel.
  • Brackets: Metal supports used to anchor the tunnel to the wall.
  • Wheels: There are 3 different wheel types available, depending on use and location:
  • Nylon wheels: The most widely used, default option. They provide optimum sliding on parquet, linoleum, and other smooth surfaces.
  • Rubber wheels: For similar uses to the nylon wheels but with improved grip due to their rubber finish.
  • Pneumatic wheels: For outdoor use on grass, gravel or dirt.
  • Handles: Aluminium handles on the exit end of the tunnel
  • Buckle straps: Nylon straps with hook and loop buckle at both ends of the tunnel to close when folded.

Options

  • Windows
  • Doors
  • Lacquering
  • Lettering
  • Transparent

Accessories

  • Handle: Parts to fix the scissors in the desired position when this is not possible by means of the tensioners themselves.
  • Anti-lifting guide: Aluminium guide along which the tunnel slides and prevents its movement
  • Wheel with brake: Wheel with brake + special coupling parts.
  • “Wind rings”: For use in moderate wind conditions. The canvases incorporate "winds rings".
  • Standard tunnel manual
  • Standard tunnel assembly guide
  • M2 PVC canvas catalogue
Request an estimate
1.1.3.5-Tunel-Ancho-Especial-1-1080x608
1.1.3.5-Tunel-Ancho-Especial-2-1080x608

Special - width tunnel

Major solutions are required for major projects. For these specific cases we will use large – section profiles and special accessories. Extruded profiling for the arcs enables the canvas panels to be replaced by the client themselves.

Custom manufacturing is available.

Technical characteristics

  • Height in accordance with project requirements.
  • Length in accordance with project requirements.
  • Standard distance between arcs: 1.18 metres, or as required.
  • For widths greater than 6.00m.

Parts

  • Tip: Extruded aluminium part that serves as the pivot for the scissors.
  • Blade: An 50x13.5mm aluminium profile. The blade is formed by tip + profile + tip.
  • Scissors: The scissors consist of a set of two blades: Scissors The scissors consist of a set of two blades
  • Tensors: Lacquered iron parts which tighten the canvas (unique in the market). A pair of tensors are fitted every 2 sections
  • Strips: Nylon parts inserted into the profile by which the scissors are moved when opening or closing the tunnel.
  • Brackets: Metal supports used to anchor the tunnel to the wall.
  • Wheels: There are 3 different wheel types available, depending on use and location:
  • Nylon wheels: The most widely used, default option. They provide optimum sliding on parquet, linoleum, and other smooth surfaces.
  • Rubber wheels: For similar uses to the nylon wheels but with improved grip due to their rubber finish.
  • Pneumatic wheels: For outdoor use on grass, gravel or dirt.
  • Handles: Aluminium handles on the exit end of the tunnel
  • Buckle straps: Nylon straps with hook and loop buckle at both ends of the tunnel to close when folded

Options

  • Windows
  • Doors
  • Lacquering
  • Lettering
  • Transparent

Accessories

  • Handle: Parts to fix the scissors in the desired position when this is not possible by means of the tensioners themselves.
  • Anti-lifting: guide Aluminium guide along which the tunnel slides and prevents its movement.
  • Wheel with brake: Wheel with brake + special coupling parts.
  • “Wind rings”: For use in moderate wind conditions. The canvases incorporate "winds rings".
  • Standard tunnel manual
  • Standard tunnel assembly guide
  • M2 PVC canvas catalogue
Request an estimate

Request an estimate

A company made by and for its customers

We are people who work for people. If we had to define ourselves in one sentence, we would say that we are a sports equipment company that learns each day from its customers how to help them to progress, both in their lives and their businesses.

In order for us to offer you the best possible help, please be sure to fill out the form correctly.

We will get back to you as soon as possible!

Solicitar Presupuesto INGLES
*
*

Manufacturers


We manufacture sports equipment, and sometimes, ideas arise that, at first sight, seem impossible. For that reason, in addition to designing for manufacture, we also manufacture to designs, in a flexible, efficient, and cost-competitive way in order to make ideas into reality, and to create the impossible.

Quality


We are passionate about technical excellence, the exclusive attention to detail, and the excitement of satisfying the confidence our clients have in us. We construct sports equipment products that are safe and user friendly, and we only use the finest materials together with the best technology to achieve optimal quality.

Innovation


Everything we do is done with people in mind. We always consider the challenge of how to create sports equipment that is practical, simple and useful, which can cover the demands of the business, and meet the challenges of our clients.

Guarantee


We believe in meticulous attention to detail, and in thorough work. We want our sports equipment products to stand out and be unique. Only in that way will we create surprise, smiles and strong emotional ties.

Factory:
Carretera Cogullada, 40
50014 Zaragoza (Spain)
Tel. +34 876008959

Email:
info@tatamsport.com

Newsletter:

Subscribe to our newsletter. The simplest and most convenient way to receive news updates and the best offers and promotions

© 2023. Grupo Toldos Serrano